Differences

This shows you the differences between two versions of the page.

--- patches [2024/08/22 11:23] – emozolyak
+++ patches [2024/08/22 12:02] (current) – [Case A. Older firmware which don't generate link to patch] emozolyak
@@ Line 5: / Line 5: @@
 To handle this, we developed a patch mechanism, to minimize possible issues. The process is similar to firmware upgrade with the code - you just get the patch code and apply it.
+===== 1. Getting to the patch page =====
+Depending on your firmware version there are 2 possible methods to getting to the page. Both methods require **admin** rights to do this operation.
+==== Case A. Older firmware which don't generate link to patch ====
+In this case you have to enter right URL in the browser address field.
+<code http>
+http://192.168.1.221/setup/patches.php#E4477663DB0E3CA51906E1F30127F5820D6DBA75
+</code>
+Here //192.168.1.222// is your WebHMI address and //E44...75// is the patch code you obtain from the service.
+==== Case B. Newer firmwares which create neccessary link ====
+The links to patches (if your system requres it) are located on the About page:
+{{:maintenance:patches:get-the-link-to-patch.png?direct&800|}}
+===== 2. Checking and applying the patch =====
+Press //Check// button to check the patch.
+{{:maintenance:patches:check-patch-number.png?direct&800|}}
+if the patch has been check, //Apply// button will become available.
+{{:maintenance:patches:checked-patch-cropped.png?direct&200|}}
+In case of failed check you may see similar message:
+{{:maintenance:patches:patch-check-not-passed.png?direct&800|}}
+After successful applying you will see the following message:
+{{:maintenance:patches:the-applied-patch.png?direct&800|}}