Table of Contents
Applying patches to your system
Sometimes you may encounter bug, which are inevitable thing in modern quick development cycles. New firmware releases happens at certain periods, but in the interims you may get bothered due to some bug.
To handle this, we developed a patch mechanism, to minimize possible issues. The process is similar to firmware upgrade with the code - you just get the patch code and apply it.
1. Getting to the patch page
Depending on your firmware version there are 2 possible methods to getting to the page. Both methods require admin rights to do this operation.
Case A. Older firmware which don't generate link to patch
In this case you have to enter right URL in the browser address field.
http://192.168.1.221/setup/patches.php#E4477663DB0E3CA51906E1F30127F5820D6DBA75
Here 192.168.1.222 is your WebHMI address and E44…75 is the patch code you obtain from the service.
Case B. Newer firmwares which create neccessary link
The links to patches (if your system requres it) are located on the About page:
2. Checking and applying the patch
Press Check button to check the patch.
if the patch has been check, Apply button will become available.
In case of failed check you may see similar message:
After successful applying you will see the following message:
