WebHMI Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== MTS Connect (Ukraine) ======

Lets go through the WeTelecom WM-D200 CDMA-modem tune-up procedure for MTS (Ukraine).

{{ network:wetelecom-wm-d200.png?direct&300 |}}

0. Disconnect the USB Modeswitch as described on the page "Особенности работы с некоторыми модемами".

1. Go to the network settings interface. Open the Network-> Interfaces page. Click the "Add new interface" button.

{{ network:p_net_scr_1.png?direct&600 |}}

2. Set "3G" as the interface's name. Select "UMTS/GPRS/EV-DO" protocol type. Push "Submit".

{{ network:p_net_scr_2.png?direct&600 |}}

3. Select following options:
  *Protocol: UMTS/GPRS/EV-DO
  *Modem device: /dev/ttyUSB1 (device number ttyUSB1/2/3/4/... depends on USB-devices quantity in the system and particular modem - should be selected experimentally)
  *Service Type: CDMA/EV-DO
  *APN: mtsconnect
  *PIN: 0000
  *PAP/CHAP username: mobile
  *PAP/CHAP password: internet

{{ network:mts_conn_3.png?direct&600 |}}

4. If VPN is used, it's necessary to set main gateway metric. It should be less than VPN's one.

5. In the Firewall settings, specify a WAN zone to exclude incoming connections from the Internet. Usually, they are not needed and bring additional security risks.

{{ network:mts_conn_firewall.png?direct&600 |}}

6. Click "Save and apply". The settings will be applied. If everything is done correctly, on the Network-> Interfaces page you will see a new "3G" interface with the connection installed.

{{ network:p_net_scr_6.png?direct&600 |}}

7. To check the connection to the Internet, go to the Network-> Diagnostics page and click the Traceroute button. If the Internet connection works correctly, you will see the package path to the specified server (by default openwrt.org). 

{{ network:trace_route_3g_check.png?direct&600 |}}