It is possible to run WebHMI as virtual machine. You can download VirtualBox image at Level2 system.

You must have VirtualBox installed on your computer to be able run this machine. VirtualBox Extension Pack is required as well.

Once image was downloaded, extract archive to desired destination and open WebHMI.vbox file with VirtualBox.

This will run VirtualBox and add WebHMI virtual machine into it.

You might want to adjust Processors amount on System→Processor tab settings.

Also you might need to select correct network adapter on Network→Adapter 1 tab.

Close settings window and click Start button.

Virtual machine will be started now.

In about 10-20 seconds it will complete boot process. You should see “WebHMI server started” message in console.

By default virtual machine is connected to your network via bridged network adapter. It uses static ip address 192.168.1.1. So web interface of WebHMI will be available at address 192.168.1.1 too. You can change this address later via Network Settings interface.

Open http://192.168.1.1 in your browser. You should now see WebHMI's user interface.

Congratulations! You was able to run WebHMI on your computer. Have fun with it.