User Tools

Site Tools


solutions:video_stream_using_rpi_as_proxy

Video stream proxy

Intro

Nowadays, IP camera's manufacturers do not provide unauthorized access to video stream due to security reasons. To use videostream in WebHMI it should be without login/password to access. Also, using a server in between PC and IP Camera will allow access from many users, what is a true broadcast, unlike direct IP camera connection, which is usually limited to 10 users.

The solution, is the shim web server in LAN, which will transcode H.264 to MJPEG. (e.g. Raspberry Pi). Also, this could be a Linux or Windows powered machine.

Devices prerequisites

IP Webcam testing app

If there is no IP camera at moment, you can use IP Webcam to test WebHMI videostream (as it is not ecrypted be default) or VLC transcoding if you want to substitute phone with IP camera later after testing.

Any IP camera, that can show stream using rtsp: or http: protocol.

You can see the links at IP Webcam app screen. When the IP Webcam server started, it has default cgi access via link

 http://phone-ip:8080/video

IP camera CGI setting

By default, cgi should be enabled manually in settings.
Hikvision: Configuration, Network, Advanced Settings, Enable Hikvision-CGI. Then create a cgi user.
Dahua: Configuration, Integration Protocol, Enable CGI. Use web login user.

Tested devices list:

For example, there was a two different manufacturers devices tested. Dahua DH-IPC-K22

cgi-link
http://login:password@ip-camera:80/cgi-bin/mjpg/video.cgi?channel=1&subtype=1

Hikvision DS-2CD2423G0-IW

cgi-link
http://login:password@ip-camera:80/Streaming/channels/102/httpPreview

VLC transcode

  • WebHMI with IP 192.168.1.1
  • IP Camera with IP 192.168.1.2
  • Broadcast server with IP 192.168.1.3

Broadcast server can be Windows or Linux machine, e.g. Rapsbian on Raspberry Pi . Let's consider using Rapsberry Pi 3B+ powered Raspbian 10.

To do this, VLC player is preinstalled with Rapsbian. If it is not present in the system, you can install it with

sudo apt-get install vlc

To start with, login to IP-camera and check the settings, if cgi enabled and test access via link using browser. Alternatively, if you want to test to possibility, use IP Webcam app. There is default config which allows both vlc or WebHMI videostream testing.

Command to output and argument explanations

Access to IP cameras stream usually can be provided via RTSP or HTTP protocols. Put the link in the following example and try to watch and then to transcode stream.

example_stream
cvlc -vvv http://login:password@ip-address:port/link_to_stream

That should look like this:

test_stream
cvlc -vvv rtsp://student:Hikvision@192.168.1.58:554/Streaming/Channels/102

If you can see the image, so the IP camera settings done and now you can start configure transcoding.

example_transcode_stream
cvlc -vvv -Idummy http://login:password@ip-address:port/link_to_stream  --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"

For example let's use login and password with IP camera' IP, using RTSP protocol (through 554 port) and transcode the full resolution stream to 192.168.1.3:8888 which is Raspberry Pi server and custom port 8888.

test_transcode_stream
cvlc -vvv -Idummy rtsp://student:Hikvision@192.168.1.2:554/Streaming/Channels/102  --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=192.168.1.3:8888/}"

Let's take a closer look at the command. The source stream is:

rtsp://student:Hikvision@192.168.1.2:554

Destination can be also set port only, and the IP will be IP of Raspberry Pi to get access to stream

dst=:8888/

The output broadcast URL is

http://192.168.1.3:8888

To test if it works, copy following link to terminal and run with -vvv argument to show the maximum verbosity. The output should not have warning and unresolved errors such as no codecs finded.

Perfomance optimisation

Do not forget to get rid of -vvv argument due to huge additional processor load.

There are some variants to try to optimize performance

  • Decrease IP camera stream resolution
  • Lower transcode output resolution

Lower picture resolution

#full resolution
cvlc -Idummy http://login:password@ip-address:80/link_to_stream --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
cvlc -Idummy rtsp://http://login:password@ip-address:554/link_to_stream --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
 
#transcode to lower resolution 
cvlc -Idummy http://login:password@ip-address:80/link_to_stream --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
cvlc -Idummy rtsp://http://login:password@ip-address:554/link_to_stream --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
solutions/video_stream_using_rpi_as_proxy.txt ยท Last modified: 2022/01/15 01:30 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki