Differences

This shows you the differences between two versions of the page.

--- solutions:video_stream_using_rpi_as_proxy [2021/07/30 09:15] – atolstov
+++ solutions:video_stream_using_rpi_as_proxy [2022/01/15 01:30] (current) – ↷ Links adapted because of a move operation 127.0.0.1
@@ Line 1: / Line 1: @@
-==== Intro ====
+{{ network:video_proxy_my_icon.jpg?nolink&150|}}
+====== Video stream proxy ======
-Nowadays, IP camera's manufacturers does not provide unauthorized access to video stream due to security reasons.
+===== Intro =====
-To get video stream to WebHMI it should be without login/password to access.
+Nowadays, IP camera's manufacturers do not provide unauthorized access to video stream due to security reasons. To use videostream in WebHMI it should be without login/password to access. Also, using a server in between PC and IP Camera will allow access from many users, what is a true broadcast, unlike direct IP camera connection, which is usually limited to 10 users.
-The solution, is the shim web server in LAN, which will transcode H.264 to MJPEG. (e.g. Raspberry Pi)
+The solution, is the shim web server in LAN, which will transcode H.264 to MJPEG. (e.g. Raspberry Pi).
+Also, this could be a Linux or Windows powered machine.
-==== Devices prerequisites ====
+===== Devices prerequisites =====
-Any IP camera, that can show stream using rstp:// or http:// protocol.
+==== IP Webcam testing app ====
+If there is no IP camera at moment, you can use [[https://play.google.com/store/apps/details?id=com.pas.webcam|IP Webcam]] to test WebHMI videostream (as it is not ecrypted be default) or VLC transcoding if you want to substitute phone with IP camera later after testing.
+Any IP camera, that can show stream using rtsp:// or http:// protocol.
+You can see the links at IP Webcam app screen. When the IP Webcam server started, it has default cgi access via link <code> http://phone-ip:8080/video</code>
+==== IP camera CGI setting ====
 By default, cgi should be enabled manually in settings.\\
-''Hikvision: Configuration, Network, Advanced Settings, Enable Hikvision-CGI. Then create a cgi user.''
+''Hikvision: Configuration, Network, Advanced Settings, Enable Hikvision-CGI. Then create a cgi user.''\\
-''Dahua: Configuration, Integration Protocol, Enable CGI. Use web login user.''
+''Dahua: Configuration, Integration Protocol, Enable CGI. Use web login user.''\\
 === Tested devices list: ===
+For example, there was a two different manufacturers devices tested.
 **Dahua** DH-IPC-K22          <code bash cgi-link>http://login:password@ip-camera:80/cgi-bin/mjpg/video.cgi?channel=1&subtype=1</code>
 **Hikvision** DS-2CD2423G0-IW <code bash cgi-link>http://login:password@ip-camera:80/Streaming/channels/102/httpPreview</code>
@@ Line 28: / Line 38: @@
   * WebHMI with IP 192.168.1.1
   * IP Camera with IP 192.168.1.2
-  * Raspberry Pi with IP 192.168.1.3
+  * Broadcast server with IP 192.168.1.3
-It can be done with Windows machine or Linux, e.g. Rapsbian on Raspberry Pi.
+Broadcast server can be Windows or Linux machine, e.g. Rapsbian on Raspberry Pi .
 Let's consider using Rapsberry Pi 3B+ powered Raspbian 10.
 To do this, VLC player is preinstalled with Rapsbian.
+If it is not present in the system, you can install it with
+<code bash>sudo apt-get install vlc</code>
 To start with, login to IP-camera and check the settings, if cgi enabled and test access via link using browser.
-To test if it works, copy following link to terminal and run with ''-vvv'' argument to show the maximum verbosity.
+Alternatively, if you want to test to possibility, use IP Webcam app. There is default config which allows both vlc or WebHMI videostream testing.
 ===Command to output and argument explanations===
+Access to IP cameras stream usually can be provided via RTSP or HTTP protocols.
+Put the link in the following example and try to watch and then to transcode stream.
+<code bash example_stream>
+cvlc -vvv http://login:password@ip-address:port/link_to_stream
+</code>
+That should look like this:
 <code bash test_stream>
 cvlc -vvv rtsp://student:Hikvision@192.168.1.58:554/Streaming/Channels/102
 </code>
+If you can see the image, so the IP camera settings done and now you can start configure transcoding.
+<code bash example_transcode_stream>
+cvlc -vvv -Idummy http://login:password@ip-address:port/link_to_stream  --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
+</code>
+For example let's use login and password with IP camera' IP, using RTSP protocol (through 554 port) and transcode the full resolution stream to 192.168.1.3:8888 which is Raspberry Pi server and custom port 8888.
 <code bash test_transcode_stream>
@@ Line 47: / Line 74: @@
 </code>
-where
+Let's take a closer look at the command. The source stream is:
+<code>rtsp://student:Hikvision@192.168.1.2:554</code>
+Destination can be also set port only, and the IP will be IP of Raspberry Pi to get access to stream
+<code>dst=:8888/</code>
+The output broadcast URL is
+<code>http://192.168.1.3:8888</code>
-<code>rtsp://student:Hikvision@192.168.1.2:554</code>  - login and password with IP camera' IP, using RSTP protocol (through 554 port)
-<code>dst=192.168.1.3:8888/</code> is the Raspberry Pi IP with custom port, e.g. 8888.
+To test if it works, copy following link to terminal and run with ''-vvv'' argument to show the maximum verbosity.
+The output should not have warning and unresolved errors such as no codecs finded.
-The output should not have warning and unresolved errors such as no codecs finded
+==== Perfomance optimisation ====
-There are some variants to try to optimize perfomance
+<WRAP center round important 60%>
+Do not forget to get rid of ''-vvv'' argument due to huge additional processor load.
+</WRAP>
-=== Dahua ===
-<code bash>
- #full crop
-cvlc -Idummy http://admin:admin@192.168.1.101/cgi-bin/mjpg/video.cgi?channel=1&subtype=1 --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
-cvlc -Idummy rtsp://admin:admin@192.168.1.101/cgi-bin/mjpg/video.cgi?channel=1&subtype=1 --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
-#width crop
+There are some variants to try to optimize performance
-cvlc -Idummy http://admin:admin@192.168.1.101/cgi-bin/mjpg/video.cgi?channel=1&subtype=1 --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
-cvlc -Idummy rtsp://admin:admin@192.168.1.101/cgi-bin/mjpg/video.cgi?channel=1&subtype=1 --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
+  * Decrease IP camera stream resolution
-</code>
+  * Lower transcode output resolution
-=== Hikvision ===
+=== Lower picture resolution ===
 <code bash>
-#full
+#full resolution
-cvlc -Idummy rtsp://student:Hikvision@192.168.1.58:554/Streaming/Channels/102  --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
+cvlc -Idummy http://login:password@ip-address:80/link_to_stream --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
-cvlc -Idummy http://student:Hikvision@192.168.1.58:80/Streaming/channels/102/httpPreview --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
+cvlc -Idummy rtsp://http://login:password@ip-address:554/link_to_stream --sout "#transcode{vcodec=MJPG}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
-#width crop
+#transcode to lower resolution
-cvlc -Idummy rtsp://student:Hikvision@192.168.1.58:554/Streaming/Channels/102  --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
+cvlc -Idummy http://login:password@ip-address:80/link_to_stream --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
-cvlc -Idummy http://student:Hikvision@192.168.1.58:80/Streaming/channels/102/httpPreview --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
+cvlc -Idummy rtsp://http://login:password@ip-address:554/link_to_stream --sout "#transcode{vcodec=MJPG,vfilter=canvas{width=640,height=480}}:standard{access=http{mime=multipart/x-mixed-replace;boundary=--7b3cc56e5f51db803f790dad720ed50a},mux=mpjpeg,dst=:8888/}"
 </code>