run_webhmi_on_raspberry_pi
This is an old revision of the document!
Run WebHMI on Raspberry PI
It is possible to run WebHMI system on Raspberry PI 3. You can download disk image at Level2 system.
Once disk image was downloaded, extract archive to desired destination and copy it to your MicroSD card.
In Linux-based operation systems this can be done with following command:
sudo dd if=RaspberryPi.img of=/dev/sdc bs=1M
Here /dev/sdc is a path to your card reader.
Open http://192.168.1.1 in your browser. You should now see WebHMI's user interface.
Default credentials are:
Login | admin |
Password | admin |
Congratulations! You was able to run WebHMI on your Raspberry Pi 3. Have fun with it.
Troubleshooting
run_webhmi_on_raspberry_pi.1554728527.txt.gz ยท Last modified: 2019/04/08 13:02 by akuzmuk