level2:send_collected_data_to_level2
This is an old revision of the document!
Send collected data to Level2
After you connect your WebHMI or IoT device to the Level2, it is possible to send its real-time or logged data to Level2.
- archive (logged) data are used for building various reports and graphs
- real-time data are used to show important node's current values on a map
For WebHMI, there are 2 options:
Option 1. You can do this from Level2 node setup page:
Option 2. Right from the WebHMI Level2 menu:
For the MQTT devices, please refer to the part #8 of the quick manual for the 7bit AirGate device where an example of IoT setup for specific device is provided.
level2/send_collected_data_to_level2.1644421226.txt.gz ยท Last modified: 2022/02/09 15:40 by emozolyak