Differences

This shows you the differences between two versions of the page.

--- level2:send_collected_data_to_level2 [2022/02/09 15:38] – emozolyak
+++ level2:send_collected_data_to_level2 [2022/02/09 15:42] (current) – [Connection over MQTT] emozolyak
@@ Line 6: / Line 6: @@
   *__real-time data__ are used to show important node's current values on a map
-You can do this from Level2 node setup page:
+**For WebHMI, there are 2 options: **
+Option 1. You can do this from Level2 node setup page:
 {{ network:l2_node_services_page_rec.png |}}
-Or right from the WebHMI Level2 menu:
+Option 2. Right from the WebHMI Level2 menu:
 {{ network:send_data_webhmi_setup.png |}}
-<WRAP center round info 80%>
+----
-**For the MQTT devices**, please refer to the **part #8** of the [[https://docs.webhmi.com.ua/_media/network:7bit_airgate-airpoint_eng.pdf|quick manual for the 7bit AirGate device]] where an example of IoT setup for specific device is provided.
+==== Connection over MQTT ====
-</WRAP>
+Please refer to the **Part #8 (Device's registers setup)** of the [[https://docs.webhmi.com.ua/_media/network:7bit_airgate-airpoint_eng.pdf|quick manual for the 7bit AirGate device]] where an example of IoT setup for specific device is provided.