level2:send_collected_data_to_level2
This is an old revision of the document!
Send collected data to Level2
After you connect WebHMI to Level2, it is possible to send WebHMI real-time or logged data to Level2.
- archive (logged) data are used for building various reports and graphs
- real-time data are used to show important node's current values on a map
You can do this from Level2 node setup page:
Or right from the WebHMI Level2 menu:
For the MQTT devices, please refer to the part #8 of the quick manual for the 7bit AirGate device where an example of IoT setup for specific device is provided.
level2/send_collected_data_to_level2.1644405156.txt.gz ยท Last modified: 2022/02/09 11:12 by emozolyak