Differences

This shows you the differences between two versions of the page.

--- level2:send_collected_data_to_level2 [2021/02/12 14:53] – ↷ Links adapted because of a move operation atolstov
+++ level2:send_collected_data_to_level2 [2022/02/09 15:42] (current) – [Connection over MQTT] emozolyak
@@ Line 1: / Line 1: @@
 ====== Send collected data to Level2 ======
-After you [[level2:how_to_connect_webhmi_to_level2|connect WebHMI to Level2]], it is possible to send WebHMI real-time or logged data to Level2.
+After you [[https://docs.webhmi.com.ua/start#introduction1|connect your WebHMI or IoT device to the Level2]], it is possible to send its real-time or logged data to Level2.
   *__archive (logged) data__ are used for building various reports and graphs
   *__real-time data__ are used to show important node's current values on a map
-You can do this from Level2 node setup page:
+**For WebHMI, there are 2 options: **
-{{ ::l2_node_services_page_rec.png |}}
+Option 1. You can do this from Level2 node setup page:
-Or right from the WebHMI Level2 menu:
+{{ network:l2_node_services_page_rec.png |}}
-{{ ::send_data_webhmi_setup.png |}}
+Option 2. Right from the WebHMI Level2 menu:
+{{ network:send_data_webhmi_setup.png |}}
+----
+==== Connection over MQTT ====
+Please refer to the **Part #8 (Device's registers setup)** of the [[https://docs.webhmi.com.ua/_media/network:7bit_airgate-airpoint_eng.pdf|quick manual for the 7bit AirGate device]] where an example of IoT setup for specific device is provided.