level2:communication_between_2_webhmis_via_internet
This is an old revision of the document!
Table of Contents
Communication between 2 or more WebHMIs via internet
Sometimes you need to have a connection between far systems, e.g. like in the following picture:
You might want to automatically control supply pumps depending on the water level in a far water tower or reservoir.
With the WebHMI and Level2 connectivity options it is done with ease:
Option 1. VPN and Modbus TCP
- Connect both WebHMIs to Level2 and and remember remote node (reservoir side) IP address in the VPN network
- Turn On (Modbus TCP Server) on the water redervoir side
- Enable routing for pump side WebHMI to the remote peer node
- Create Modbus TCP connection on the pump side WebHMI using IP address from (1)
Option 2. Using MQTT protocol
level2/communication_between_2_webhmis_via_internet.1644328762.txt.gz ยท Last modified: 2022/02/08 13:59 by emozolyak