Differences

This shows you the differences between two versions of the page.

--- ftp_server [2021/08/05 10:46] – emozolyak
+++ ftp_server [2021/09/14 10:58] – [Using Level2 VPN to access WebHMI via FTP] emozolyak
@@ Line 5: / Line 5: @@
 By default FTP server is enabled. Starting from WebHMI version 3.3 you can disable FTP server on **Setup -> Settings** page on **Services** tab.
+{{ ::ftp_checkbox.png?direct&600 |}}
+===== Access data via FTP Server=====
 The default settings for the FTP server are the same as for network settings, namely:
   ***Login:**   admin
   ***Password** webhmi
+You can use FTP server to download raw SQLite3 databases with all collected data f
+rom SD card remotely.
+These files are located in **log** folder. There is separate database for every day. Each such day file contains only data collected during that day.
+{{ ::log-databases.jpg?direct&600 |}}
+===== Using Level2 VPN to access WebHMI via FTP =====
+<WRAP center round tip 60%>
+Please note that FTP connection is not processed via Level2 server. So you have to add another node in the Level2 nodes for your PC as a VPN client, enable routing from this VPN client to the WebHMI and then use VPN IP address to access the target WebHMI over FTP.
+</WRAP>