Differences

This shows you the differences between two versions of the page.

--- faq [2024/01/23 09:48] – [Wifi] emozolyak
+++ faq [2024/04/03 08:14] (current) – [Resetting project from network settings] emozolyak
@@ Line 163: / Line 163: @@
 Please refer to this [[connect_iot_device_to_l2|article]].
+====== Compatibility issues ======
+==== Resetting project from network settings ====
+<code>
+Can not login after fw upgrade.
+</code>
+Sometimes you may upgrade your WebHMI to the newer version with the old project on it. In some cases, depending on your firmware combinations you may not login successfully into the system. You can reset WebHMI project from the network settings then.
+After that, restore the backup again.
+{{ :network:management:webhmi-reset-from-net-settings_.png?direct&800 |}}
 ====== Networking ======
@@ Line 171: / Line 184: @@
 </code>
 Yes, you can. But only one of them can be active at the moment.
+===== Access over HTTPS =====
 <code>