Send collected data to Level2

After you connect your WebHMI or IoT device to the Level2, it is possible to send its real-time or logged data to Level2.

• archive (logged) data are used for building various reports and graphs
• real-time data are used to show important node's current values on a map

For WebHMI, there are 2 options:

Option 1. You can do this from Level2 node setup page:

Option 2. Right from the WebHMI Level2 menu:

Please refer to the Part #8 (Device's registers setup) of the quick manual for the 7bit AirGate device where an example of IoT setup for specific device is provided.