====== Send collected data to Level2 ======

After you [[https://docs.webhmi.com.ua/start#introduction1|connect your WebHMI or IoT device to the Level2]], it is possible to send its real-time or logged data to Level2. 

  *__archive (logged) data__ are used for building various reports and graphs
  *__real-time data__ are used to show important node's current values on a map

**For WebHMI, there are 2 options: **

Option 1. You can do this from Level2 node setup page:

{{ network:l2_node_services_page_rec.png |}}

Option 2. Right from the WebHMI Level2 menu:

{{ network:send_data_webhmi_setup.png |}}

----
==== Connection over MQTT ====

Please refer to the **Part #8 (Device's registers setup)** of the [[https://docs.webhmi.com.ua/_media/network:7bit_airgate-airpoint_eng.pdf|quick manual for the 7bit AirGate device]] where an example of IoT setup for specific device is provided.