User Tools

Site Tools


zte_mf100

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

zte_mf100 [2019/01/22 11:49] (current)
emozolyak created
Line 1: Line 1:
 +====== Connection to KyevStar (Ukraine) with ZTE MF100 ======
 +
 +Lets go through the tune-up ZTE MF100 3G-modem procedure for KyevStar (Ukraine).
 +
 +1. Go to the net settings interface by Network->Interfaces path. Push "Add new interface" button.
 +
 +{{ :p_net_scr_1.png?direct&600 |}}
 +
 +2. Set "3G" as the interface's name. Select "UMTS/GPRS/EV-DO" protocol type. Push "Submit".
 +
 +{{ :p_net_scr_2.png?direct&600 |}}
 +
 +3. Select following options:
 +  *Protocol: UMTS/GPRS/EV-DO
 +  *Modem device: /dev/ttyUSB3 (device number ttyUSB1/2/3/4/... depends on USB-devices quantity in the system and particular modem - should be selected experimentally)
 +  *Service Type: GPRS/UMTS
 +  *APN: 3g.kyivstar.net (or other, provided by the provider)
 +  *PIN: leave empty
 +  *PAP/CHAP username: leave empty
 +  *PAP/CHAP password: leave empty
 +
 +{{ ::3g_kstar_1.png?direct&600 |}}
 +
 +4. If you are using a VPN connection, you must specify the gateway metric. It should be less than the gateway's metric in the VPN connection.
 +
 +{{ :p_net_scr_4.png?direct&600 |}}
 +
 +5. In the Firewall settings, specify a WAN zone to exclude incoming connections from the Internet. Usually, they are not needed and bring additional security risks.
 +
 +{{ :p_net_scr_5.png?direct&600 |}}
 +
 +6. Click "Save and apply". The settings will be applied. If everything is done correctly, on the Network-> Interfaces page you will see a new "3G" interface with the connection installed.
 +
 +{{ :p_net_scr_6.png?direct&600 |}}
 +
 +7. To check the connection to the Internet, go to the Network-> Diagnostics page and click the Traceroute button. If the Internet connection works correctly, you will see the package path to the specified server (by default openwrt.org). 
 +
 +{{ :p_net_scr_7.png?direct&600 |}}
 +