no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Connection to KyevStar (Ukraine) with ZTE MF100 ======
+Lets go through the tune-up ZTE MF100 3G-modem procedure for KyevStar (Ukraine).
+. Go to the net settings interface by Network->Interfaces path. Push "Add new interface" button.
+{{ :p_net_scr_1.png?direct&600 |}}
+. Set "3G" as the interface's name. Select "UMTS/GPRS/EV-DO" protocol type. Push "Submit".
+{{ :p_net_scr_2.png?direct&600 |}}
+. Select following options:
+  *Protocol: UMTS/GPRS/EV-DO
+  *Modem device: /dev/ttyUSB3 (device number ttyUSB1/2/3/4/... depends on USB-devices quantity in the system and particular modem - should be selected experimentally)
+  *Service Type: GPRS/UMTS
+  *APN: 3g.kyivstar.net (or other, provided by the provider)
+  *PIN: leave empty
+  *PAP/CHAP username: leave empty
+  *PAP/CHAP password: leave empty
+{{ ::3g_kstar_1.png?direct&600 |}}
+. If you are using a VPN connection, you must specify the gateway metric. It should be less than the gateway's metric in the VPN connection.
+{{ :p_net_scr_4.png?direct&600 |}}
+. In the Firewall settings, specify a WAN zone to exclude incoming connections from the Internet. Usually, they are not needed and bring additional security risks.
+{{ :p_net_scr_5.png?direct&600 |}}
+. Click "Save and apply". The settings will be applied. If everything is done correctly, on the Network-> Interfaces page you will see a new "3G" interface with the connection installed.
+{{ :p_net_scr_6.png?direct&600 |}}
+. To check the connection to the Internet, go to the Network-> Diagnostics page and click the Traceroute button. If the Internet connection works correctly, you will see the package path to the specified server (by default openwrt.org).
+{{ :p_net_scr_7.png?direct&600 |}}