Differences

This shows you the differences between two versions of the page.

--- run_webhmi_on_raspberry_pi [2019/04/08 15:07] – akuzmuk
+++ run_webhmi_on_raspberry_pi [2023/05/18 14:35] (current) – emozolyak
@@ Line 2: / Line 2: @@
 It is possible to run WebHMI system on Raspberry PI 3. You can download disk image at [[https://level2.webhmi.com.ua/apps/downloads/list| Level2 system]].
-{{ ::rpi-2.jpg?nolink |}}
+{{ network:rpi-2.jpg?nolink |}}
-Once disk image was downloaded, extract archive to desired destination and copy it to your microSD card.
+Once disk image was downloaded, extract archive to desired destination and copy it to your **microSD card**.
 Attention! Please use best available microSD card. Cheap commercial-grade cards can die any time. Data can be saved to external USB flashdrive/SSD if needed.
@@ Line 22: / Line 22: @@
 If you want to use internal SD card as data storage you should create additional partition on it. You can use all available free space for this purpose.
-{{ ::create-partition.gif?nolink |}}
+{{ network:create-partition.gif?nolink |}}
 Please format this partition to **ext4** filesystem.
@@ Line 32: / Line 32: @@
 Now you can turn on the Raspberry Pi. Wait 10-20 seconds and open [[http://192.168.1.1|http://192.168.1.1]] in your browser. You should now see WebHMI's user interface.
-{{ ::rpi-1.jpg?nolink |}}
+{{ network:rpi-1.jpg?nolink |}}
 Default credentials are:
@@ Line 48: / Line 48: @@
   * Real-time clock with CR2032 battery backup
-{{ ::7bit-power-hat.jpg?nolink |}}
+{{ network:7bit-power-hat.jpg?nolink |}}
 With this extension board it is very easy to try all WebHMI's features in near to real-life environment: you can connect it to the same 24V power supply and connect to RS-485 devices. There is no need to use weak microUSB 5V phone chargers, and inconvenient USB RS485 adapters.
-{{ ::7bit-power-hat-rpi.jpg?nolink |}}
+{{ network:7bit-power-hat-rpi.jpg?nolink |}}