Differences

This shows you the differences between two versions of the page.

--- registers [2021/07/22 15:22] – [Bulk operations] emozolyak
+++ registers [2021/11/01 15:40] – [Basic tab] emozolyak
@@ Line 1: / Line 1: @@
+{{ ::menu-icon-registers.png?nolink&40|}}
 ====== Working with registers ======
 ===== General information =====
@@ Line 39: / Line 40: @@
   ***Communication interval override** - Override the default polling time for this register (Setup / Settings menu). Adjustable in steps of 500 ms. Up to 1 hour.
   ***Send real time data to WebHMI cloud** checknox - Specifies whether to send data to the cloud-based level2 system.
+<wrap em>Starting from 4.1 fw there are extra functions:</wrap>
+=== Read/Write mode settings ===
+There is now a convenient function for assigning register access mode – “read / write”, “read-only”, “write-only”. There are devices for some registers of which only writing is possible, for example, the control word of some frequency converters, refrigeration controllers, etc. For these devices a custom protocol.
+Read-only mode is also useful for distributed systems with shared data. For example, this situation can arise when using the MQTT protocol, when the user can inadvertently override the data of another device.
+{{ ::rw_mode_.png?direct&600 |}}
+=== Save and Apply ===
+When editing a project, it is often necessary to make several edits in different places in the project. Before, each small change was accompanied by re-initialization of the system, which in turn caused a heavy load on the processor in large projects. Now, there is a tool that allows you to make many edits and then apply them in one go, which ultimately speeds up the time to complete these operations.
+{{ ::save_apply.png?direct&400 |}}
@@ Line 91: / Line 105: @@
 ==== Dictionary ====
+{{ :menu-icon-dictionaries.png?nolink&40|}}
 Contains the enumeration of pairs 'value, text word(s)', when you select a dictionary for the register, the values read from the device are compared with the data of the dictionary and, if the word matches, the word corresponding to the value will be found. If there is a mismatch, the register will contain the value itself. The dictionaries are created and edited in the menu Setup -> Dictionary.
@@ Line 153: / Line 169: @@
 ----
-Selection allows to send register value as a resource meter. There are special tools in WebHMI & [[level2:setup_resource_meters_and_resources_consumption_analysis  | Level2]] cloud system to generatate resource consumption reports.
+Selection allows to send register value as a resource meter. There are special tools in [[resource_local_tool |WebHMI]] & [[level2:setup_resource_meters_and_resources_consumption_analysis  | Level2]] cloud system to generatate resource consumption reports.
 {{ ::resource_property.png?nolink |}}