Differences

This shows you the differences between two versions of the page.

--- network_connections_setup [2018/10/04 16:45] – [Connect to an existing network (Client mode)] emozolyak
+++ network_connections_setup [2021/06/07 08:12] – [Connect to an existing network (Client mode)] emozolyak
@@ Line 2: / Line 2: @@
 ===== LAN and WAN interfaces =====
-----
 **In any** project for WebHMI you have to connect to local network or Internet. There are several options how to do this, and the most reliable is wired Ethernet.
@@ Line 27: / Line 25: @@
 {{ ::luci-network-interfaces-setup.png?direct&600 |}}
-All settings for convenience are divided into several separate groups of bookmarks: **General, Advanced, Physical и Firewall settings:**
+All settings for convenience are divided into several separate groups of bookmarks: **General, Advanced, Physical and Firewall settings:**
 **General setup** allows you to set general (basic) settings, which will differ, depending on the selected protocol type (connection method: Static IP, DHCP, PPPoE, L2TP, etc.). In the case of static addressing (the most widely used option), this will be: host IP [[https://en.wikipedia.org/wiki/IP_address | address]], subnet mask, gateway address and [[https://en.wikipedia.org/wiki/Domain_Name_System | DNS]] server address.
@@ Line 168: / Line 166: @@
 {{ ::client_wifi_added.png?direct&600 |}}
+You can see or change the settings of the network connection in the same place, in the tab ' Network / Interfaces'
+{{ :client_wifi_added_2.png?direct&600 |}}
+<WRAP center round important 60%>
+When you have multiple Wi-Fi networks setup with at least one in the client mode, please be aware that if the client wifi net fail, the master wifi network will fail too.
+</WRAP>
 ===== Connecting WebHMI to the Internet =====
-A common task is to configure WebHMI with simultaneous access to the Internet for WebHMI, and the computer from which WebHMI is configured. Let's consider several connection scenarios.
+A common task is to configure WebHMI with __simultaneous access__ to the Internet for both WebHMI, and the computer from which WebHMI is configured. Let's consider several connection scenarios.
 **Option 1.** WebHMI is a **gateway** for the PC.