Differences

This shows you the differences between two versions of the page.

--- network_connections_setup [2021/08/05 09:50] – emozolyak
+++ network_connections_setup [2021/08/05 09:50] – emozolyak
@@ Line 7: / Line 7: @@
 WEBHMI has 2 RJ45 network connectors labeled LAN and WAN. By default, they are configured as follows:
   ***LAN** is configured as [[https://en.wikipedia.org/wiki/DHCP | DHCP]]-server that automatically distributes network settings to the connected devices. LAN ethernet is bridged with the WiFi WebHMI master network
-  ***WAN* as a DHCP client focused on connecting to a network that already has a A DHCP server, for example, a router distributing the Internet. In addition, WAN Firewall settings forbid all incoming connectoins from WAN network, and therefore access to WebHMI's web-interface is possible only from LAN. [1]. You can change the current settings using the **Network setup** section, which you can access via the link on the authorization page or from the //Setup/Network// setup menu after logging in:
+  ***WAN** as a DHCP client focused on connecting to a network that already has a A DHCP server, for example, a router distributing the Internet. In addition, WAN Firewall settings forbid all incoming connectoins from WAN network, and therefore access to WebHMI's web-interface is possible only from LAN. [1]. You can change the current settings using the **Network setup** section, which you can access via the link on the authorization page or from the //Setup/Network// setup menu after logging in:
 {{ ::network-setup-enter.png?direct&600 |}}