Differences

This shows you the differences between two versions of the page.

--- integration_with_other_systems [2019/09/03 13:31] – [Example - connecting to a remote module via its web server] emozolyak
+++ integration_with_other_systems [2019/09/03 14:59] – [Example - connecting to a remote module via its web server] emozolyak
@@ Line 53: / Line 53: @@
 Most currently produced remote i/o modules have configuration and status web-page for diagnostic and setup.
-When you have a module which is not supported with WebHMI and using custom protocol is difficult, there is another option of accessing the module through its embedded web-server with HTTP requests right from WebHMI.
+When you have a module which is not supported by the WebHMI and the usage of the custom protocol feature is complicated, there is another option of accessing the module through its embedded web-server with HTTP requests right from WebHMI.
-For a example we have the UC20-FBC-xxx (any bus Modubs, Eth/IP etc) remote I/O module from Weidmuller. The module has web server for diagnostinc and setup:
+For a example we have the UC20-FBC-xxx (any bus Modubs, Ethernet/IP, DeviceNet etc) remote I/O module from Weidmuller. The module has web server for diagnostinc and setup:
 {{ ::uremote_config_page.gif?direct&600 |}}