Differences

This shows you the differences between two versions of the page.

--- first_power_up [2018/10/04 09:47] – [Wireless connection over Wi-Fi] emozolyak
+++ first_power_up [2022/01/15 07:07] – ↷ Links adapted because of a move operation 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== First power-up ======
+{{ network:power_up.png?nolink50|}}
 ===== Preparation for work =====
@@ Line 24: / Line 25: @@
 WebHMI has 2 Ethernet ports: a LAN configured as a DHCP server and a WAN configured as a DHCP client with incoming connections disabled by default in the firewall. Thus, access to the web interface of the system can only be obtained from the LAN port.
-{{ ::connect-lan.jpg?direct&912 |}}
+{{ network:connect-lan.jpg?direct&912 |}}
 To get access to web interface please configure your network adapter either in DHCP client mode or with following settings:
@@ Line 44: / Line 45: @@
 ^ Password | admin |
-{{ ::signin.png?direct&400 |}}
+{{ network:signin.png?direct&400 |}}
 On login screen at the bottom section you can find current version of firmware and link to network setup interface.
+After logging in by default, you will be taken to the registers configuration page:
-After logging in by default, you will be taken to the registers configuration page (in the Setup/Registers menu). In the future, the whole project is configured through the side submenu "Setup".
+==== An "after login" project view after 3.6 fw ====
-{{ :new-signin.png?direct&912 |}}
+ (in the Setup/Registers menu). In the future, the whole project is configured through the side submenu "Setup".
+=== Moon color theme ===
+{{ network:reg_list_fw_40.png?direct&800 |}}
+=== Mars color theme ===
+{{ network:reg_list_fw_40_mars_skin.png?direct&800 |}}
+==== An "after login" project view before 3.6 fw====
+{{ network:new-signin.png?direct&800 |}}