Differences

This shows you the differences between two versions of the page.

--- connecting_to_s7-1200 [2022/01/15 16:44] – ↷ Links adapted because of a move operation 127.0.0.1
+++ connecting_to_s7-1200 [2023/09/07 17:47] (current) – [Check network connection details] emozolyak
@@ Line 25: / Line 25: @@
 After that, you can create registers, using for them the standard notation of memory area addresses in Siemens PLCs - QB0.0, VW0, etc. For more information, see here.
-**Note** - although WebHMI correctly recognizes addresses with the data type included in them (for example, IW0 in the notation indicates a Word type register from Inputs memory), but WebHMI will decide what data length to read from ther register setting (IW0 will serve only as base address). I.e. the
+<WRAP center round info 60%>
-address is used exclusively as an address and in fact these three addresses - IW0, IB0, ID0 are equivalent to the
+Please note that WebHMI will recognize the data type for the S7 register not from the register address expression of MW, MB or MD, but from the register configuration, i.e. what data type (Byte, Word ..) is chosen for the register
-I0 record (the actual type will be determined by the register data type settings (Word, Byte or Double Word)).
+E.g. in fact these three addresses - IW0, IB0, ID0 are equivalent to the I0 record.
+See more on [[siemens_iso|this page]]
+</WRAP>