Differences

This shows you the differences between two versions of the page.

--- configuration_reset [2021/07/20 15:50] – [Clear project data method] emozolyak
+++ configuration_reset [2021/08/06 14:56] – emozolyak
@@ Line 1: / Line 1: @@
+{{ :menu-icon-reset.png?nolink&40|}}
 ====== Configuration reset ======
@@ Line 4: / Line 5: @@
-  *Network configuration reset - can only be made using special routine with hardware 'Reset' button.
@@ Line 12: / Line 13: @@
 ===== Project configuration reset =====
-==== Clear project data method ====
+Project configuration reset - can be made in 3 ways:
-*Project configuration reset - can be made in 2 ways:
+  *from the project itself - use Setup / Clean project & data menu
-  *from the project itself - Setup / Clean project & data menu
   *from the network configuration ( WebHMI/Network/ Reset menu)
+  *remove SD card and format it
+==== Clear project data method ====
+=== Fw versions 3.6 and higher (popup setup window) ===
+{{ setup_menu_prj_clean.png }}
-{{clear_project.png?direct}}
+{{ :clean_project_options_highlighted.png?direct&600 |}}
-If you select "WebHMI project configuration and all collected data" option system will reset all settings and collected data. Network setting will not be affected.
+=== Fw version 3.5 and low (side setup menu) ===
+{{clear_project.png?direct}}
+<wrap em>The system will reset all settings and collected data. Network setting will not be affected.
+</wrap>
 ==== From networking menu method ====
@@ Line 31: / Line 37: @@
 ===== Network settings reset =====
-To reset the network settings, press and hold the 'Reset' button (located on the front panel of the device) when the device is turned off. Then turn the device on while keeping button pressed.
+The network configuration reset - can only be made using special routine with hardware 'Reset' button. To reset the network settings, press and hold the 'Reset' button (located on the front panel of the device) when the device is turned off. Then turn the device on while keeping button pressed.
 {{ ::net_conf_button.png?direct&200 |}}